item(s)
HR-3U NIMH Battery 1.2v 2300mah (Rechargeable)
1.2 volts | 2300 mAh | L: 0.56" H: 1.98" W: 0.56" | 0.24 lbs | 2.76 Wh |
Slightly different to your current battery? Click here for details
|
We are expecting new stock soon, please contact us for details.
This product has been superseded by the HR-3UWX 2400mAh FDK/SANYO Low Self Discharge Pre-charged AA Rechargeable NiMH Battery
HR-3U 1.2 Volt 2300 Mah FDK Button Top Rechargeable NI-MH Battery
Product Features
Maintenance Free
BatteryGuy Nickel Metal Hydride do not require any maintenance while in use. Electrolyte levels are calibrated during factory production.
Puncture Resistant Case
The casing of this Nickel Metal Hydride has been designed to protect the internal components from impacts with sharp objects for extra durability in transport and use.
Corrosion Resistance
Both the terminals and casing are rust resistant so you won't experience loss of power because of faulty connections even in humid conditions.
High Energy Density
The way we make our volt Nickel Metal Hydride means you get an excellent energy per pound of weight ratio.
Optimized Conductivity
The materials we use inside and out have been specially selected for their optimal electrical conductivity so energy loss inside the battery is minimized.
Impact Resistant
All our Nickel Metal Hydride are designed to survive impacts making them tough in transport and tough in use.
Detailed description
This product has been superseded by the HR-3UWX 2400mAh FDK/SANYO Low Self Discharge Pre-charged AA Rechargeable NiMH Battery
The Rechargeable HR-3U cell is used in a wide variety of Electronic Devices.
---
FDK Twicell batteries feature minimal internal resistance and exhibit excellent discharge characteristics under high-rate discharge current conditions. With output power much higher than that of dry cells, Twicell batteries can withstand more than 500 repeated charge/discharge cycles, as well as offering outstanding economy. In addition, even though the batteries are stored for a long time, the original capacity is almost recovered by repeated charging/discharging, offering excellent storage characteristics.
Brand: Sanyo
Chemistry: Nickel Metal Hydride (NI-MH)
Dimensions: 0.56" Diameter x 1.98 Tall
Connector Type: Button Top
Description: AA cell NI-MH battery
Required for this product
One of the following items is required for this product to operate.
Technical Specifications
Voltage | 1.2 |
Amperage | 2300 mAh |
Dimensions | L: 0.56" , H: 0.56" , W: 0.56" |
Product Code | HR-3U NIMH Battery |
Availability | Out of Stock |
Quantity in Stock | 0 |
Weight | 0.24 lbs |
UPC | 00842923105086 |
Documentation
Alerts and Warnings
If your application runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.
You have to install your replacement batteries in the same original configuration they came out and are required to use your existing hardware and cables to reconnect the replacement batteries when applicable.
It is your responsibility to verify the battery or batteries being ordered match the battery or batteries in your application prior to placing your order. Please check your:
- existing battery dimensions (Length x Width x Height)
- quantity needed to replace all batteries
- voltage and amp hour requirements
Manufacturers may change requirements without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.
CALIFORNIA PROPOSITION 65 WARNING