HR-3UWX 2400mAh FDK/SANYO Low Self Discharge Pre-charged AA Rechargeable NiMH Battery

v a dimensions w i
1.2 volts 2400 mAh L: 0.56" H: 1.98" W: 0.56" 0.24 lbs 2.88 Wh
In stock
SKU
HR-3UWX
BatteryGuy Price:
$7.35
  • Buy 20 for $5.00 each and save 32%
  • Buy 50 for $4.89 each and save 33%
  • Buy 100 for $4.58 each and save 38%

HR-3UWX 1.2 Volt 2400 mAh FDK / SANYO Button Top Pre-Charged Rechargeable NI-MH AA Battery

A good replacement for the discontinued HR-3U 1.2V 2300 mAh TWICELL battery, FDK HR-3U, SANYO HR-3U and others..

See Full Description
Need a Quote for a Volume Purchase?

Product Features

Maintenance Free

Maintenance Free

BatteryGuy Nickel Metal Hydride do not require any maintenance while in use. Electrolyte levels are calibrated during factory production.

Puncture Resistant Case

Puncture Resistant Case

The casing of this Nickel Metal Hydride has been designed to protect the internal components from impacts with sharp objects for extra durability in transport and use.

Corrosion Resistance

Corrosion Resistance

Both the terminals and casing are rust resistant so you won't experience loss of power because of faulty connections even in humid conditions.

High Energy Density

High Energy Density

The way we make our volt Nickel Metal Hydride means you get an excellent energy per pound of weight ratio.

Optimized Conductivity

Optimized Conductivity

The materials we use inside and out have been specially selected for their optimal electrical conductivity so energy loss inside the battery is minimized.

Impact Resistant

Impact Resistant

All our Nickel Metal Hydride are designed to survive impacts making them tough in transport and tough in use.

Detailed description

HR-3UWX 1.2 Volt 2400 mAh FDK / SANYO Button Top Pre-Charged Rechargeable NI-MH AA Battery

---

A good replacement for the discontinued HR-3U 1.2V 2300 mAh TWICELL battery, FDK HR-3U, SANYO HR-3U and others..

FDK Twicell batteries feature minimal internal resistance and exhibit excellent discharge characteristics under high-rate discharge current conditions. With output power much higher than that of dry cells, Twicell batteries can withstand more than 500 repeated charge/discharge cycles, as well as offering outstanding economy. In addition, even though the batteries are stored for a long time, the original capacity is almost recovered by repeated charging/discharging, offering excellent storage characteristics.

Brand: FDK / Sanyo

Chemistry: Nickel Metal Hydride (NI-MH)

Dimensions: 0.56" Diameter x 1.98 Tall

Connector Type:  Button Top

Description: AA cell NI-MH battery

Technical Specifications

product base image
Voltage 1.2
Amperage 2400 mAh
Dimensions L: 0.56" , H: 1.98" , W: 0.56"
Product Code HR-3UWX
Availability In Stock
Same day shipping available
Quantity in Stock 50
Weight 0.24 lbs

Product Q&A

Your Question : HR-3UWX 2400mAh FDK/SANYO Low Self Discharge Pre-charged AA Rechargeable NiMH Battery
No questions found!

Alerts and Warnings

If your application runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.

You have to install your replacement batteries in the same original configuration they came out and are required to use your existing hardware and cables to reconnect the replacement batteries when applicable.

It is your responsibility to verify the battery or batteries being ordered match the battery or batteries in your application prior to placing your order. Please check your:

  • existing battery dimensions (Length x Width x Height)
  • quantity needed to replace all batteries
  • voltage and amp hour requirements

Manufacturers may change requirements without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.