2LS17500-TOY 3.6 Volt 3600 mAh PLC Lithium Battery. Our 2LS17500-TOY battery can be used as a replacement for Programmable logic controller CPU units, Robot Control backup batteries, Kawasaki's various Robot controls as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
A133 4.5 Volt 600 mAh Alkaline Specialty. Our A133/A21PX battery can be used as a replacement for the Eveready 523 and others. It is used in Cameras, Condenser Microphones, Microphones, Computers, Signal Processors, Meters, Industrial Equipment, Time Clocks, as well as other things.
(This is one Battery – Please verify quantity needed for your application before ordering)
A19PX / 531 Alkaline Specialty Battery 4.5v 600mAh W Snap Terminals. Used as a high quality replacement power source for vintage to modern electronics such as Polaroid Cameras, instruments, etc.
(This is one Battery – Please verify quantity needed for your application before ordering)
A32PX 6.0 Volt Alkaline Specialty Battery. Our A32PX battery can be used as a replacement for the Mercuric Oxide PX32 or E164 battery that was commonly used in cameras such as Yashicas (Electro 35GL, Electro GSN, Electro GTN, Electro AX, MG-1).
(This is one Battery – Please verify quantity needed for your application before ordering)
B9500T 3.6 Volt 16500 mAh PLC Lithium Battery. Our B9500T battery can replace many Allen Bradley and Modicon cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9503UR 3 Volt 1200 mAh PLC Lithium Battery. Can be used as a replacement for Texas Instruments 5TI-103 series programmable logic controllers and industrial computers as well as Energy+ B9503 and others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9508 3 Volt 2600 mAh PLC Lithium Battery. Our B9508 battery can be used as a replacement for many Fedco, Energy+ and Texas Instruments (5xx) cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9550T 3.6 Volt 2500 mAh PLC Lithium Battery. Our B9550T battery can be used as a replacement for Modicon MA-9255-000 and others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9592T 3.6 Volt 2500 Mah PLC Lithium Battery. Our B9592T battery can be used as a replacement for B114134, Comp-133, Energy+ B9592T cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9593T 3.6 Volt 2600 Mah Clock Memory Support Lithium Battery. Our B9593T battery is a good replacement for various 3.6 volt PC/AT batteries.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9625T 3 Volt 1200 Mah PLC Lithium Battery. Our B9625T battery can be used as a replacement for many Fedco and Modicon cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9631T 3 Volt 1200 mAh PLC Lithium Battery. Our B9631T battery can be used as a replacement for Allen Bradley 1745-B1, A-40840-512-01, SLC-100, SLC-150 and others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9650B 3.6 Volt 1000 mAh PLC Lithium Battery. Can replace Fedco B9650B, Omron CG1H, Omron CJ1G, Omron CJ1H, Omron CPM2A, Omron CPM2A-BAT01, Omron CQM1H and others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9650T 3 Volt 1200 mAh PLC Lithium Battery. Can be used as a replacement for Fedco B9650T, Allen Bradley 1747-BA, Allen Bradley 1769-BA, Allen Bradley A-40063-043-01 and others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9651T 3 Volt 1700 Mah PLC Lithium Battery. Our B9651T battery can be used as a replacement for many Allen Bradley, Fedco, GE Fanuc, Koyo, Siemens, Sanyo and Texas Instruments cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9670AB 3 Volt 1800 Mah PLC Lithium Battery. Our B9670AB battery can be used as a replacement for many Fedco and Allen Bradley 1756 cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9670B 3.6 Volt 2100 mAh PLC Lithium Battery. Can replace Energy + B9670B, Fedco B9670B, many Omron cross references and others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9670BSM 3.0 Volt 1700 Mah Programmable Logic Controller Battery
(This is one Battery – Please verify quantity needed for your application before ordering)
B9670CH 3 Volt 2600 Mah PLC Lithium Battery. Our B9670CH battery can be used as a replacement for many Fedco, Energy+, GE Fanuc and Cutler Hammer cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9670E 3.6 Volt 2100 mAh PLC Lithium Battery. Can replace Fedco B9670E, Energy+ B9670E, Bondwell B300, Bondwell B310, Epson Equity IE and others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9670FS5 3.6 Volt 2100 mAh PLC Lithium Battery. Can replace Fedco B9670FS5, GE Fanuc IC655ACC550, GE Fanuc IC655ACC550A and others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9670MC 3.6 Volt 2100 mAh PLC Lithium Battery. Our B9670MC battery can be used as a replacement for many Fedco, Hitachi and Mitsubishi cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9708T 3.6 Volt 2600 mAh PLC Lithium Battery. Our B9708T battery can be used as a replacement for many Energy+, Fedco and Allen Bradley cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9712T 3 Volt 1500 Mah PLC Lithium Battery. Our B9712T battery can be used as a replacement for many Cutler Hammer, Fanuc, Fedco, Ge Fanuc and Panasonic cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9758CH 3.6 Volt 2600 mAh PLC Lithium Battery. Can be used as a replacement for Energy+ B9758CH, Fedco B9758CH, GE Fanuc D500-AB10, Cutler Hammer D500-AB10 and others.
(This is one Battery – Please verify quantity needed for your application before ordering)
B9781T 3 Volt 1700 Mah PLC Lithium Battery. Our B9781T battery can be used as a replacement for many Energy+, Fedco and Modicon cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
3.0 Volt 1200 Mah Lithium 3 Pin Panasonic Battery. This PLC battery can be used as a replacement for BR-2/3AE2SP, BR-2/3AE2SPE, BR-2/3AE2SPN, BR2/3AESP, BR2/3AE2SPE, BR2/3AE2SPN and many others.
(This is one Battery – Please verify quantity needed for your application before ordering)
BR-ACF2P 6 Volt 2500 Mah PLC Lithium Battery. Our BR-ACF2P battery can be used as a replacement for many Cutler Hammer, Energy+, GE and GE Fanuc cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
BR-AGCF2W 6 Volt 1800 Mah PLC Lithium Battery. Our BR-AGCF2W battery can be used as a replacement for many Cutler Hammer, Fanuc and Sanyo / FDK cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
BR-CCF1TH 3 Volt 5000 Mah PLC Lithium Battery. Our BR-CCF1TH battery can be used as a replacement for many Cutler Hammer, Energy+, Fanuc, Fedco and Mitsubishi cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
BR-CCF2TH 6 Volt 5000 Mah PLC Battery. Our BR-CCF2TH battery can be used as a replacement for many Cutler Hammer and Fanuc cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
BR-CCH8B 6 Volt 20000 Mah PLC Lithium Battery. Our BR-CCH8B battery can be used as a replacement for GE FANUC A98L-0031-0023 and can be used in the PLC model GE FANUC C-Flex Robot Control
(This is one Battery – Please verify quantity needed for your application before ordering)
3.0 Volt 1200 Mah Lithium Battery. This PLC battery can be used as a replacement for BR-2/3A, BR-2/3ASSPE, BR-2/3ASSPN, BR17335, BR2/3A, BR2/3ASSPE, BR2/3ASSPN and many others.
(This is one Battery – Please verify quantity needed for your application before ordering)
BR2/3A-AB 3 Volt 1200 mAh PLC Lithium Battery. Our BR2/3A-AB battery can be used as a replacement for many Energy+, Fedco and Allen Bradley 1756 cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
BR2/3A4F 6 Volt 2900 Mah PLC Lithium Battery. Our BR2/3A4F battery can be used as a replacement for many Fanuc 18-T series programmable logic controllers and robot controllers and Fanuc ALPHA iSV, BETA iSV and BETA iSVSP CNC system amplifiers.
(This is one Battery – Please verify quantity needed for your application before ordering)
CR1/2AA-WSC 3 Volt 950 Mah PLC Lithium Battery. Our CR1/2AA-WSC battery can be used as a replacement for many Siemens cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
CR14250SE-AB 3 Volt 850 Mah PLC Lithium Battery. Our CR14250SE-AB battery can be used as a replacement for many Allen Bradley, Fedco and Energy+ cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
CR14250SE-CJ 3 Volt 850 Mah PLC Lithium Battery. Our CR14250SE-CJ battery can be used as a replacement for many Energy+, Fedco and Omron cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
CR14250SE-FT 3 Volt 850 mAh PLC Lithium Battery with 3-Pin (2-pin [+] 8mm), 1/2AA-Size.
Brand: FDK (FDK who purchased Sanyo's cylindrical primary lithium battery unit has changed it's branding from Sanyo to FDK on this product)
(This is one Battery – Please verify quantity needed for your application before ordering)
CR14250SE-IC 3 Volt 950 mAh PLC Lithium Battery. Our CR14250SE-IC battery can replace Koyo D2-230, Koyo D2-240, Koyo D2-BAT, Koyo DL230, Koyo DL240 and others.
(This is one Battery – Please verify quantity needed for your application before ordering)
CR17335SE-MC 3 Volt 1800 Mah PLC Lithium Battery. Our CR17335SE-MC battery can be used as a replacement for many Energy+, Fedco and Mitsubishi cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
CR17335SE-WR 3 Volt 1800 Mah PLC Lithium Battery. Our CR17335SE-WR battery can be used as a replacement for a wide variety of Modicon and Modicon Quantum cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
CR17450E-RL 3.0 Volt 2200 Mah PLC Lithium Battery. Our CR17450E-RL battery can be used as a replacement for many GE Fanuc and Le Blonde cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
CR2032-WR 3 Volt 2200Mah Lithium PLC Battery.
(This is one Battery – Please verify quantity needed for your application before ordering)
CR2477-T5 3 Volt 950 Mah Lithium Battery. Our CR2477-T5 battery can be used as a replacement for many Energy+, Fedco and Texas Instruments cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)
CR2477N-3RX 3.0 Volt 3000 mAh Lithium PLC Battery. This is a 3 cell Lithium battery with wire leads and connector designed for GE Fanuc RX7i series programmable logic controller CPU units. Manufactured with quality Panasonic brand coin cells.
(This is one Battery – Please verify quantity needed for your application before ordering)
FDK FUJI CR8-LHC 3.0V 3000 mAh Lithium Battery with RD029 Connector for ONSRUD F148E15 CNC Machine. Can be used as a replacement for CR8.LHC BROWN PLUS, ONSRUD F148E15 CNC Machine, Fuji CR8-LHC, FANUC LX98L-0031-00012 and Others. (THIS IS NOT A FLUSHER BATTERY)..
(This is one Battery – Please verify quantity needed for your application before ordering)
CRAA 3.0 Volt 2000 mAh Lithium AA Battery.
(This is one Battery – Please verify quantity needed for your application before ordering)
ER14505 3.6 Volt 2400 mAh PLC Lithium AA Battery. Our ER14505 battery can be used as a replacement for many Xeno, Tadiran, Saft and Fanso cross references as well as others.
(This is one Battery – Please verify quantity needed for your application before ordering)