![]() | ![]() | ![]() | ![]() |
|
---|---|---|---|---|
3.60 volts | 2500 mAh | L: 0.57" H: 1.98" W: 0.57" | 0.12 lbs | 9 Wh |
Slightly different to your current battery?
click here for details
|
BatteryGuy PLC batteries do not require any maintenance while in use. Electrolyte levels are calibrated during factory production.
The casing of this PLC battery has been designed to protect the internal components from impacts with sharp objects for extra durability in transport and use.
Both the terminals and casing are rust resistant so you won't experience loss of power because of faulty connections even in humid conditions.
The way we make our 3.60 volt 2500mAh PLC batteries means you get an excellent energy per pound of weight ratio.
The materials we use inside and out have been specially selected for their optimal electrical conductivity so energy loss inside the battery is minimized.
All our PLC batteries are designed to survive impacts making them tough in transport and tough in use.
BatteryGuy 3.6 Volt 2500 mAh replacement battery for Cutler Hammer D500 Control.
It meets or exceeds the Cutler Hammer D500 Control PLC specifications defined by the Original Equipment Manufacturer but at a much lower price.
(This is one Battery – Please verify quantity needed for your application before ordering)
Chemistry: Lithium Thionyl Chloride
Dimensions: 0.57" Long x 0.57" Wide x 1.98" High
Connector Type: Wire Leads Connector
Description: AA cell lithium battery
Shelf Life: 10+ Years
Stable voltage and broad temperature range: (-60° to +85°C)
Primary Lithium Batteries are Categorized as a CLASS 9 HAZMAT Per Federal Regulations and Can Not be Shipped on Aircraft.
Voltage | 3.60 volts | |
Amperage | 2500 mAh | |
Dimensions | L: 0.57", H: 1.98", W: 0.57" | |
Product code | B9758CH | |
SKU - | 192404202118-b9758ch | |
Availability |
In stock. Same day shipping available |
|
Condition | New | |
Quantity in stock | 14 item(s) available | |
Weight | 0.12 lbs | |
UPC | 842923103051 |
There are no technical documents available for this product. If you need further information you can ask a question or call us Toll Free on 800-572-1975 during business hours.
If your Cutler Hammer D500 Control runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.
You have to install your replacement batteries in the same original configuration they came out and are required to use your existing Cutler Hammer D500 Control hardware and cables to reconnect the replacement batteries when applicable.
It is your responsibility to verify the battery or batteries being ordered match the battery or batteries in your Cutler Hammer D500 Control prior to placing your order. Please check your:
Manufacturers may change requirements without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.
CALIFORNIA PROPOSITION 65 WARNING
This product contains Carbon Black, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.If you want to tell someone you know about this product simply fill in the details below and we'll send them details and a link to this page.