0
item(s)
Cart is empty
 |  |  |  |
|
|---|---|---|---|---|
| 1.20 volts | 1200 mAh | L: 0.66" H: 1.69" W: 0.66" | 0.24 lbs | 1.44 Wh |
|
Slightly different to your current battery?
click here for details
|
||||
BatteryGuy Emergency Light batteries do not require any maintenance while in use. Electrolyte levels are calibrated during factory production.
The casing of this Emergency Light battery has been designed to protect the internal components from impacts with sharp objects for extra durability in transport and use.
Both the terminals and casing are rust resistant so you won't experience loss of power because of faulty connections even in humid conditions.
The way we make our 1.20 volt 1200mAh Emergency Light batteries means you get an excellent energy per pound of weight ratio.
The materials we use inside and out have been specially selected for their optimal electrical conductivity so energy loss inside the battery is minimized.
All our Emergency Light batteries are designed to survive impacts making them tough in transport and tough in use.
BatteryGuy 1.2 Volt 1200 mAh replacement battery for Lithonia ELB-1p201n2.
It meets or exceeds the Lithonia ELB-1p201n2 emergency light specifications defined by the Original Equipment Manufacturer but at a much lower price.
Note this product can also replace:
(This is one Battery – Please verify quantity needed for your application before ordering)
Rating: 1.2 volt, 1200mah
Chemistry: Nickel Cadmium (Nicad)
Dimensions: 0.66" Diameter x 1.69" High
Configuration: One cell
Connector Type: Wire Leads With Red 41REC Connector
BatteryGuy Nicad Batteries Typically Have 20% - 40% More Capacity Than Other Regularly Available Batteries of the Same Size and Can Support up to 500 Charge/ Discharge Cycles or Five Years Standby Power Under Normal Conditions.
Rechargeable
| Voltage | 1.20 volts | |
| Amperage | 1200 mAh | |
| Dimensions | L: 0.66", H: 1.69", W: 0.66" | |
| Product code | BGN1P201N2 Battery | |
| SKU - | 842923124322-bgn1p201n2--battery | |
| Availability |
In stock. Same day shipping available |
|
| Condition | New | |
| Quantity in stock | 5000 item(s) available | |
| Weight | 0.24 lbs | |
There are no technical documents available for this product. If you need further information you can ask a question or call us Toll Free on 800-572-1975 during business hours.
If your Lithonia ELB-1p201n2 comes from a device which runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.
You have to install your replacement Lithonia ELB-1p201n2 batteries in the same original configuration they came out of the device they power and are required to use your existing hardware and cables to reconnect the replacement batteries when applicable.
It is your responsibility to verify the battery or batteries being ordered match the Lithonia ELB-1p201n2 specifications prior to placing your order. Please check your:
Manufacturers may change specifications without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.
CALIFORNIA PROPOSITION 65 WARNING
Batteries, battery terminals, and related accessories can expose you to chemicals including Cadmium and Cadmium compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.If you want to tell someone you know about this product simply fill in the details below and we'll send them details and a link to this page.
