0
item(s)
Cart is empty
 |  |  |  |
|
|---|---|---|---|---|
| 1.55 volts | 40 mAh | L: 0.37" H: 0.08" W: 0.37" | 0.24 lbs | 0.06 Wh |
|
Slightly different to your current battery?
click here for details
|
||||
BatteryGuy 1.55 volt 40 mAh replacement battery for Renata RENATA-371-MP.
It meets or exceeds the Renata RENATA-371-MP specifications defined by the Original Equipment Manufacturer at a much lower price.
Note this product can also replace:
Brand: renata
Description: This is a 1 cell battery for Consumer and Industrial Applications.
Type: High Drain
Chemistry: Zinc / Monovalent Silver Oxide, high drain
Measures: 0.081" (2.05mm) Long X 0.37" (9.5mm) Diameter
Designation: IEC-60086-3
Operating Temperature: -10°C - 60°C
Capacity: 40 mAh, Discharge over 25.5k? at 20º C to 1.2V
If your Renata RENATA-371-MP comes from a device which runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.
You have to install your replacement Renata RENATA-371-MP batteries in the same original configuration they came out of the device they power and are required to use your existing hardware and cables to reconnect the replacement batteries when applicable.
It is your responsibility to verify the battery or batteries being ordered match the Renata RENATA-371-MP specifications prior to placing your order. Please check your:
Manufacturers may change specifications without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.
