0
item(s)
item(s)
CR17335SE Industrial Lithium Battery 3.0v 1800mah
|
|
|
|
|
3 volts | 1800 mAh | L: 0.67" H: 1.30" W: 0.67" | 0.08 lbs | 5.4 Wh |
|---|---|---|---|---|
|
Slightly different to your current battery? Click here for details
|
||||
In stock
SKU
CR17335SE
BatteryGuy Price:
$6.50
CR17335SE 3.0 Volt 1800 Mah FDK (formerly SANYO) Button Top Lithium 2/3 A Battery
Need a Quote for a Volume Purchase?
Product Features
Maintenance Free
BatteryGuy Lithium Batteries do not require any maintenance while in use. Electrolyte levels are calibrated during factory production.
Puncture Resistant Case
The casing of this Lithium battery has been designed to protect the internal components from impacts with sharp objects for extra durability in transport and use.
Corrosion Resistance
Both the terminals and casing are rust resistant so you won't experience loss of power because of faulty connections even in humid conditions.
High Energy Density
The way we make our volt Lithium Batteries means you get an excellent energy per pound of weight ratio.
Optimized Conductivity
The materials we use inside and out have been specially selected for their optimal electrical conductivity so energy loss inside the battery is minimized.
Impact Resistant
All our Lithium Batteries are designed to survive impacts making them tough in transport and tough in use.
Detailed description
The CR17335SE Battery is a Good Memory Back-Up Power Source. Used in a Wide Array of Electronic Devices and Equipment. The CR17335SE Can be Used Over a Wide Temperature Range and is Leak Resistant. Remember, Standard Lithium Batteries Are Non-Rechargeable.
---
Brand: FDK (Previously SANYO)
Chemistry: Lithium, Lithium Manganese Dioxide
Dimensions: 0.67" Diameter x 1.30" Tall
Connector Type: Button Top
Description: 2/3 A cell lithium battery
Shelf Life: 10+ Years
Stable voltage and broad temperature range: (-40° to +85°C)
Construction: Concentric (“bobbin”) electrodes, Stainless steel container, Un-fused individual cells
Safety: Compliant with IEC 86-4 safety standard and EN 50020 intrinsic safety standard, Compliance with the European directive RoHS
Required for this product
One of the following items is required for this product to operate.
Technical Specifications
| Voltage | 3 |
| Amperage | 1800 mAh |
| Dimensions | L: 0.67" , H: 0.67" , W: 0.67" |
| Product Code | CR17335SE |
| Availability |
In Stock
Same day shipping available |
| Quantity in Stock | 28 |
| Weight | 0.08 lbs |
| UPC | 00842923103716 |
Documentation
Product Q&A
Question:
(
(
(
(
Question:
Alerts and Warnings
If your application runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.
You have to install your replacement batteries in the same original configuration they came out and are required to use your existing hardware and cables to reconnect the replacement batteries when applicable.
It is your responsibility to verify the battery or batteries being ordered match the battery or batteries in your application prior to placing your order. Please check your:
- existing battery dimensions (Length x Width x Height)
- quantity needed to replace all batteries
- voltage and amp hour requirements
Manufacturers may change requirements without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.
CALIFORNIA PROPOSITION 65 WARNING
This product contains Carbon Black, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.
