![]() | ![]() | ![]() | ![]() |
|
---|---|---|---|---|
6 volts | 1.2 ah | L: 3.82" H: 2.00" W: 0.94" | 1.24 lbs | 7.2 Wh |
Slightly different to your current battery?
click here for details
|
This 6 volt 1.2ah SLA battery can be discharged and recharged multiple times. Cycle service life will depend on the depth of discharges. See the Technical Specification Sheet for more details.
BatteryGuy SLA batteries do not require any maintenance while in use. Electrolyte levels are calibrated during factory production and do not need to be inspected or topped up
All BatteryGuy SLA batteries are designed for deep cycling making them ideal for UPSs, Emergency Lighting, Mobile Medical Devices and many other applications.
Each of the 3 cells within this SLA battery is wrapped in a puncture resistant polyethylene envelope so even if the outercase is pierced no leakage will occur.
We use Silver plated copper Faston Tabs, copper wire lead connectors, Coperized Silver or Lead stud terminals and Stainless Steel nut and bolt terminals depending on the model
We know charging equipment or the appliance that the battery powers can malfunction but our one way gas safety vents ensure there is no risk of battery explosion or fire.
Internal plate buckling can kill a battery outright or simply reduce its lifespan. Our AGM separators gives the plates extra support to eliminate buckling.
The way we make our 6 volt 1.2ah SLA batteries means you get an excellent energy per pound of weight ratio.
The materials we use inside and out have been specially selected for their optimal electrical conductivity so energy loss inside the battery is minimized.
This price is for TWO BatteryGuy 6 volt 1.2 ah batteries that can be used to replace CooPower CP6-1.2.
These batteries meet or exceed the CooPower CP6-1.2 specifications defined by the Original Equipment Manufacturer but at a much lower price.
Chemistry: Rechargeable Sealed Lead Acid
Dimensions: 3.82" L x 0.94" W x 2" H
Height w/terminals: 2.2" H
Connector Type: F1
Voltage | 6 volts | |
Amperage | 1.2 ah | |
Dimensions | L: 3.82", H: 2.00", W: 0.94" | |
Product code | BG-612F1 (Qty of 2) | |
SKU - | 192404139179-bg-612f1-(qty-of-2) | |
Availability |
In stock. Same day shipping available |
|
Condition | New | |
Quantity in stock | 238 item(s) available | |
Weight | 1.24 lbs | |
If your CooPower CP6-1.2 (2 Pack) comes from a device which runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.
You have to install your replacement CooPower CP6-1.2 (2 Pack) batteries in the same original configuration they came out of the device they power and are required to use your existing hardware and cables to reconnect the replacement batteries when applicable.
It is your responsibility to verify the battery or batteries being ordered match the CooPower CP6-1.2 (2 Pack) specifications prior to placing your order. Please check your:
Manufacturers may change specifications without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.
CALIFORNIA PROPOSITION 65 WARNING
Batteries, battery posts, battery terminals, and related accessories can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.BatteryGuy Sealed Lead Acid batteries are market leading portable power products used in emergency lighting, Uninterruptible Power Supplies, wheelchairs and electric scooters, alarms, trolling motors and many other applications.
A sealed lead acid battery being cut open to reveal its internal components. Do not try this at home as sealed lead acid batteries contain harmful chemicals which may damage your skin and clothing.
If you want to tell someone you know about this product simply fill in the details below and we'll send them details and a link to this page.