item(s)
BGN400-2AWP/2AWP-PR326EC 4.8V 400mAh Nickel Cadmium
4.8 volts | 400 mAh | L: 1.93" H: 1.09" W: 1.19" | 0.2 lbs | 1.92 Wh |
Slightly different to your current battery? Click here for details
|
4.8 Volt 400 MAH Nickel Cadmium Nicad Assembly with PR326EC Connector (Rechargeable). Commonly used in Emergency Lighting.
Product Features
Maintenance Free
BatteryGuy Nickel Cadmium Batteries do not require any maintenance while in use. Electrolyte levels are calibrated during factory production.
Puncture Resistant Case
The casing of this Nickel Cadmium battery has been designed to protect the internal components from impacts with sharp objects for extra durability in transport and use.
Corrosion Resistance
Both the terminals and casing are rust resistant so you won't experience loss of power because of faulty connections even in humid conditions.
High Energy Density
The way we make our volt Nickel Cadmium Batteries means you get an excellent energy per pound of weight ratio.
Optimized Conductivity
The materials we use inside and out have been specially selected for their optimal electrical conductivity so energy loss inside the battery is minimized.
Impact Resistant
All our Nickel Cadmium Batteries are designed to survive impacts making them tough in transport and tough in use.
Detailed description
4.8 Volt 400 MAH Nickel Cadmium Nicad Assembly with PR326EC Connector (Rechargeable). Commonly used in Emergency Lighting.
Chemistry: Nickel Cadmium (Nicad)
Dimensions (each pack individualy): 2.24" Long x 0.56" Wide x 0.56" High
Configuration: Two Cells one on top of other wired to two more cells one on top of other with wire leads & connector
Connector Type: Wire Leads With PR326EC Connector
BatteryGuy Nicad Batteries Typically Have 20% - 40% More Capacity Than Other Regularly Available Batteries of the Same Size and Can Support up to 500 Charge/ Discharge Cycles or Five Years Standby Power Under Normal Conditions. Nickel Cadmium Batteries Are Commonly Found in Emergency Lighting, Alarm/ Security Systems, Backup Power Devices and Other Electrical Devices.
Rechargeable
Technical Specifications
Voltage | 4.8 |
Amperage | 400 mAh |
Dimensions | L: 1.93" , H: 1.09" , W: 1.19" |
Product Code | BGN400-2AWP/2AWP-PR326EC |
Availability |
In Stock Same day shipping available |
Quantity in Stock | 589 |
Weight | 0.2 lbs |
Documentation
There are no technical documents available for this product. If you need further information you can ask a question or call us Toll Free on 800-572-1975 during business hours.
Alerts and Warnings
If your application runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.
You have to install your replacement batteries in the same original configuration they came out and are required to use your existing hardware and cables to reconnect the replacement batteries when applicable.
It is your responsibility to verify the battery or batteries being ordered match the battery or batteries in your application prior to placing your order. Please check your:
- existing battery dimensions (Length x Width x Height)
- quantity needed to replace all batteries
- voltage and amp hour requirements
Manufacturers may change requirements without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.
CALIFORNIA PROPOSITION 65 WARNING
Batteries, battery terminals, and related accessories can expose you to chemicals including Cadmium and Cadmium compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.