![]() | ![]() | ![]() | ![]() |
|
---|---|---|---|---|
3.60 volts | 3300 mAh | L: 5.05" H: 0.89" W: 0.98" | 0.30 lbs | 11.88 Wh |
Slightly different to your current battery?
click here for details
|
BatteryGuy Nickel Metal Hydride batteries do not require any maintenance while in use. Electrolyte levels are calibrated during factory production.
The casing of this Nickel Metal Hydride battery has been designed to protect the internal components from impacts with sharp objects for extra durability in transport and use.
Both the terminals and casing are rust resistant so you won't experience loss of power because of faulty connections even in humid conditions.
The way we make our 3.60 volt 3300mAh Nickel Metal Hydride batteries means you get an excellent energy per pound of weight ratio.
The materials we use inside and out have been specially selected for their optimal electrical conductivity so energy loss inside the battery is minimized.
All our Nickel Metal Hydride batteries are designed to survive impacts making them tough in transport and tough in use.
Rechargeable 3.6 Volt 3300 mAh NiMH Refrigerant Leak Detector Battery with PRB830EC Connector
Chemistry- Nickel Metal Hydride (NiMH)
Dimensions: 5.05" Long x 0.98" Wide x 0.89" High (128.27mm x 24.89mm x 22.60mm)
Configuration: Three Cells in a Vertical Stack
Connector Type: Wire Leads With PRB830EC Connector
Rechargeable
Voltage | 3.60 volts | |
Amperage | 3300 mAh | |
Dimensions | L: 5.05", H: 0.89", W: 0.98" | |
Product code | BGNMH3300-3AWP-PRB830EC | |
SKU - | 19867 | |
Availability |
In stock. Same day shipping available |
|
Condition | New | |
Quantity in stock | 104 item(s) available | |
Weight | 0.30 lbs | |
UPC | 00192404062330 |
There are no technical documents available for this product. If you need further information you can ask a question or call us Toll Free on 800-572-1975 during business hours.
If your application runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.
You have to install your replacement batteries in the same original configuration they came out and are required to use your existing hardware and cables to reconnect the replacement batteries when applicable.
It is your responsibility to verify the battery or batteries being ordered match the battery or batteries in your application prior to placing your order. Please check your:
Manufacturers may change requirements without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.
If you want to tell someone you know about this product simply fill in the details below and we'll send them details and a link to this page.