item(s)
Nickel Cadmium Battery 1.2v 1800mah | BGN1800 (Rechargeable)
1.2 volts | 1800 mAh | L: 0.91" H: 1.70" W: 0.91" | 0.15 lbs | 2.16 Wh |
Slightly different to your current battery? Click here for details
|
Rechargeable 1.2 Volt 1800 Mah Nicad Battery
Product Features
Maintenance Free
BatteryGuy Nickel Cadmium Batteries do not require any maintenance while in use. Electrolyte levels are calibrated during factory production.
Puncture Resistant Case
The casing of this Nickel Cadmium battery has been designed to protect the internal components from impacts with sharp objects for extra durability in transport and use.
Corrosion Resistance
Both the terminals and casing are rust resistant so you won't experience loss of power because of faulty connections even in humid conditions.
High Energy Density
The way we make our volt Nickel Cadmium Batteries means you get an excellent energy per pound of weight ratio.
Optimized Conductivity
The materials we use inside and out have been specially selected for their optimal electrical conductivity so energy loss inside the battery is minimized.
Impact Resistant
All our Nickel Cadmium Batteries are designed to survive impacts making them tough in transport and tough in use.
Detailed description
The BGN1800 is commonly used for rebuilding Tool, RC, Electric Boats, Airsoft battery packs as well as used in Medical equipment and other Industrial / Commercial equipment.
---
Chemistry: Nickel Cadmium (Nicad)
Dimensions: 0.91" Diameter x 1.70" High
Configuration: One Sub C
Connector Type: Flat Top
BatteryGuy Nicad Batteries Typically Have 20% - 40% More Capacity Than Other Regularly Available Batteries of the Same Size and Can Support up to 500 Charge/ Discharge Cycles or Five Years Standby Power Under Normal Conditions. Nickel Cadmium Batteries Are Commonly Found in Emergency Lighting, Alarm/ Security Systems, Backup Power Devices and Other Electrical Devices.
Rechargeable
Technical Specifications
Voltage | 1.2 |
Amperage | 1800 mAh |
Dimensions | L: 0.91" , H: 1.70" , W: 0.91" |
Product Code | BGN1800 |
Availability |
In Stock Same day shipping available |
Quantity in Stock | 14500 |
Weight | 0.15 lbs |
UPC | 842923100548 |
Documentation
Product Q&A
I need two Sanyo KR1300SC (BGN 1800) batteries for my cordless B&D srewdriver. Will you connect these batteries end to end and put tabs on each end to connect to my drill wires, which has about 1/8" female terminals? This should make it the same as Panasonic BCBD 9018 battery. Thank you for your prompt reply.
Alerts and Warnings
If your application runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.
You have to install your replacement batteries in the same original configuration they came out and are required to use your existing hardware and cables to reconnect the replacement batteries when applicable.
It is your responsibility to verify the battery or batteries being ordered match the battery or batteries in your application prior to placing your order. Please check your:
- existing battery dimensions (Length x Width x Height)
- quantity needed to replace all batteries
- voltage and amp hour requirements
Manufacturers may change requirements without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.
CALIFORNIA PROPOSITION 65 WARNING
Batteries, battery terminals, and related accessories can expose you to chemicals including Cadmium and Cadmium compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.