MEMORIAL HOLIDAY 2023
BatteryGuy will be closed for the Memorial Holiday on Monday 29th May. You can still shop online and place orders but please note orders placed on Monday 29th and Tuesday 30th will be shipped on Wednesday 31st. Telephone support is closed on Monday but will be open again on Tuesday.
![]() | ![]() | ![]() | ![]() |
|
---|---|---|---|---|
3 volts | 1800 mAh | L: 0.68" H: 1.34" W: 1.34" | 0.08 lbs | 5.4 Wh |
Slightly different to your current battery?
click here for details
|
BatteryGuy PLC batteries do not require any maintenance while in use. Electrolyte levels are calibrated during factory production.
The casing of this PLC battery has been designed to protect the internal components from impacts with sharp objects for extra durability in transport and use.
Both the terminals and casing are rust resistant so you won't experience loss of power because of faulty connections even in humid conditions.
The way we make our 3 volt 1800mAh PLC batteries means you get an excellent energy per pound of weight ratio.
The materials we use inside and out have been specially selected for their optimal electrical conductivity so energy loss inside the battery is minimized.
All our PLC batteries are designed to survive impacts making them tough in transport and tough in use.
BatteryGuy 3 Volt 1800 mAh replacement battery for Mitsubishi Q6BAT.
It meets or exceeds the Mitsubishi Q6BAT PLC specifications defined by the Original Equipment Manufacturer but at a much lower price.
(This is one Battery – Please verify quantity needed for your application before ordering)
Chemistry: Lithium
Dimensions: 0.68" Diameter X 1.34" Long
Connector Type: Wire Leads with Connector
Description: 1 Cell Lithium Battery
Works With: Mitsubishi Q02CPU, Q02HCPU, Q06HCPU, Q12HCPU, Q12PHCPU, Q12PRHCPU, Q25HCPU, Q25PHCPU, Q25PRHCPU, Q170HBATC, Q172HCPU, Q173HCPU programmable logic controllers
Shelf Life: Approx. 10 Years
Stable voltage and broad temperature range: (-40° to +80°C)
Primary Lithium Batteries are Categorized as a CLASS 9 HAZMAT Per Federal Regulations and Can Not be Shipped on Aircraft.
Voltage | 3 volts | |
Amperage | 1800 mAh | |
Dimensions | L: 0.68", H: 1.34", W: 1.34" | |
Product code | CR17335SE-MC | |
SKU - | 842923138688-cr17335se-mc | |
Availability |
In stock. Same day shipping available |
|
Condition | New | |
Quantity in stock | 148 item(s) available | |
Weight | 0.08 lbs | |
UPC | 842923102917 |
There are no technical documents available for this product. If you need further information you can ask a question or call us Toll Free on 800-572-1975 during business hours.
If your Mitsubishi Q6BAT comes from a device which runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.
You have to install your replacement Mitsubishi Q6BAT batteries in the same original configuration they came out of the device they power and are required to use your existing hardware and cables to reconnect the replacement batteries when applicable.
It is your responsibility to verify the battery or batteries being ordered match the Mitsubishi Q6BAT specifications prior to placing your order. Please check your:
Manufacturers may change specifications without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.
CALIFORNIA PROPOSITION 65 WARNING
This product contains Carbon Black, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.If you want to tell someone you know about this product simply fill in the details below and we'll send them details and a link to this page.