3 volts | 850 mAh | L: 0.56" H: 1.00" W: 0.56" | 0.08 lbs | 2.55 Wh |
Slightly different to your current battery?
click here for details
|
BatteryGuy PLC batteries do not require any maintenance while in use. Electrolyte levels are calibrated during factory production.
The casing of this PLC battery has been designed to protect the internal components from impacts with sharp objects for extra durability in transport and use.
Both the terminals and casing are rust resistant so you won't experience loss of power because of faulty connections even in humid conditions.
The way we make our 3 volt 850mAh PLC batteries means you get an excellent energy per pound of weight ratio.
The materials we use inside and out have been specially selected for their optimal electrical conductivity so energy loss inside the battery is minimized.
All our PLC batteries are designed to survive impacts making them tough in transport and tough in use.
BatteryGuy 3 Volt 850 mAh replacement battery for FDK CR14250SE-FT.
It meets or exceeds the FDK CR14250SE-FT specifications defined by the Original Equipment Manufacturer but at a much lower price.
Note this product can also replace:
(This is one Battery – Please verify quantity needed for your application before ordering)
BatteryGuy PLC and Industrial Computer Batteries are Manufactured to Meet or Exceed the Quality of the Original Equipment Manufacturer. Only the Highest Grade of Materials are Used to Manufacture our Batteries, with Safety and Performance in Mind. Please be Aware of Online Pirate Companies who Make Their Own Batteries with Insufficient Safety Circuits and Low Grade Materials. Insufficient Circuits and Parts Can Result in a Possible Fire or Explosion in Some Cases.
Brand: FDK (FDK who purchased Sanyo's cylindrical primary lithium battery unit has changed it's branding from Sanyo to FDK on this product)
Chemistry: Lithium-Manganese Dioxide (Li-MnO2)
Dimensions: 0.56" Diameter X 1.00" Long
Connector Type: 3-Pin (2-pin [+] 8mm)
Description: 1 Cell Lithium Battery with 2 pin one side & one pin other side
ANSI: 1/2AA, 1/2R6, 1/2UM3, IEC: 1/2ER6
Shelf Life: Approx. 10 Years
Stable voltage and broad temperature range: (-40° to +80°C)
Voltage | 3 volts | |
Amperage | 850 mAh | |
Dimensions | L: 0.56", H: 1.00", W: 0.56" | |
Product code | CR14250SE-FT | |
SKU - | 192404213169-cr14250se-ft | |
Availability |
In stock. Same day shipping available |
|
Condition | New | |
Quantity in stock | 100 item(s) available | |
Weight | 0.08 lbs | |
UPC | 00842923105352 |
There are no technical documents available for this product. If you need further information you can ask a question or call us Toll Free on 800-572-1975 during business hours.
If your FDK CR14250SE-FT comes from a device which runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.
You have to install your replacement FDK CR14250SE-FT batteries in the same original configuration they came out of the device they power and are required to use your existing hardware and cables to reconnect the replacement batteries when applicable.
It is your responsibility to verify the battery or batteries being ordered match the FDK CR14250SE-FT specifications prior to placing your order. Please check your:
Manufacturers may change specifications without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.
CALIFORNIA PROPOSITION 65 WARNING
This product contains Carbon Black, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.If you want to tell someone you know about this product simply fill in the details below and we'll send them details and a link to this page.