3.60 volts | 18 ah | L: 1.03" H: 3.85" W: 1.03" | 0.28 lbs | 64.8 Wh |
Slightly different to your current battery?
click here for details
|
BatteryGuy Lithium batteries do not require any maintenance while in use. Electrolyte levels are calibrated during factory production.
The casing of this Lithium battery has been designed to protect the internal components from impacts with sharp objects for extra durability in transport and use.
Both the terminals and casing are rust resistant so you won't experience loss of power because of faulty connections even in humid conditions.
The way we make our 3.60 volt 18ah Lithium batteries means you get an excellent energy per pound of weight ratio.
The materials we use inside and out have been specially selected for their optimal electrical conductivity so energy loss inside the battery is minimized.
All our Lithium batteries are designed to survive impacts making them tough in transport and tough in use.
Hazardous Item: When ordering, the delivery options will be limited to comply with the delivery restrictions for this product.
All items attached to this order will leave by the same delivery method.
If you have other non-hazardous items you need by quicker shipping methods, please enter your order separately from this one.
ER261020 Lithium Thionyl Chloride Battery 3.6V 18Ah. Compatible with most Digitrak and Ditchwitch transmitters.
This is a non rechargeable Lithium Battery replacement for the Digitrak Horizontal Drilling Transmitter. It is also replaces the DCI Sonde, the Ditch With Beacon and a variety of other HDD Beacons.
Chemistry: LiSOCL2
Dimensions: 1.03" (26.2mm) Diameter X 4.02" (102mm) Long
Connector Type: Button Top
Description: DBL C Cell Lithium Battery
Shelf Life: 10+ Years
Ambient temperature range: (-55° to +85°C)
Main Applications:
• Downhole oil & gas
• Measurement While Drilling (MWD)
• Logging While Drilling (LWD)
• Military devices
Note: Battery life can be effected by the transmitter type used, the depth at which it is used and the materials it is going through. This battery will fit most DigiTrak transmitters and DitchWitch beacons (please verify specs before ordering).
Voltage | 3.60 volts | |
Amperage | 18 ah | |
Dimensions | L: 1.03", H: 3.85", W: 1.03" | |
Product code | ER261020 | |
SKU - | 20163 | |
Availability |
In stock. Same day shipping available |
|
Condition | New | |
Quantity in stock | 66 item(s) available | |
Weight | 0.28 lbs | |
UPC | 00192404070755 | |
If your application runs on multiple batteries, make sure to replace all of them at the same time or you will dramatically reduce the lifespan of the new batteries by mixing them with older batteries.
You have to install your replacement batteries in the same original configuration they came out and are required to use your existing hardware and cables to reconnect the replacement batteries when applicable.
It is your responsibility to verify the battery or batteries being ordered match the battery or batteries in your application prior to placing your order. Please check your:
Manufacturers may change requirements without notice. BatteryGuy is not responsible for incorrect orders - if you need help, please contact us.
CALIFORNIA PROPOSITION 65 WARNING
This product contains Carbon Black, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.If you want to tell someone you know about this product simply fill in the details below and we'll send them details and a link to this page.